FAQs

How long will it take for my edging to arrive?
Assuming your order is in stock, normal delivery will be 1-2 days although this may increase slightly in the Spring due to the added volume of sales. Some products, such as ProEdge and Titan are on a longer lead time. Please contact us if you need more precise details.
What depth should I choose?
EverEdge comes in 3 depths – 75mm (3″), 100mm (4″) and 125mm (5″). This excludes the spikes which are 94mm (3.7″). We recommend that you bury the EverEdge to the very top of the spike (15mm into the edge face). If you have an edge which is not equal to the sizes we supply, say 50mm, simply knock the 75mm EverEdge deeper until you have the correct depth.
Is it possible to cut EverEdge?

We do not recommend that you cut EverEdge but it can be cut using a grinder or a hacksaw. The best way to lose any extra material is to lap it behind where you started if possible, or where you are not returning to the start point put a 90° bend and loose the extra along a wall, bank, flower bed etc. This will also add extra strength at the end of the edging run.

What thickness should I use, 1.6 mm or 2.5 mm?
For most applications, lawn to path or lawn to flowerbed the 1.6 mm is the preferred product to use, however if there is a possibility of vehicle traffic then the Heavy Duty or ProEdge (2.5 mm) is preferable.
How long are the EverEdge spikes?
The Classic spikes are 94 mm (3.7″) and the ProEdge spikes are 100 mm (4″)
In what situations should I use the Pin and Sleeve system?
Only when you have very poor ground conditions, especially very loose earth or sandy ground. It can also help to give extra support to your EverEdge where the edging is supporting a slope or bank. This item is not necessary in most projects.
How does Cor-Ten look when it first arrives on site?
Cor-Ten edging and Planters will not arrive on site already with the rusty patina, instead they will be a dull blue steel. Depending on conditions, the Cor-Ten will take between 3-6 months to completely change colour.

 Get In Touch

Sales Department

Des Lalor

 

Phone

 087-2 56 56 80

353+1+247 88 51

Address

16, Priory Avenue,

Stillorgan,

Co. Dublin

A94 C589